Bench Grinder Polisher

250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive

250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive
250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive

250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive

Bench Grinder Complete With An Add-On Jewellery Polishing Kit Suitable for polishing gold, silver, platinum, nickel and chrome. Supplied with our Short Version of Spindle Adapters.

As this takes up less space on the work bench. The Main Image above shows the Polishing Kit Assembled to the Bench Grinder (shown on its own in another image) and also shows the Polishing Kit Component Parts Separately in the Same Image. The Bench Grinder and Polishing Add-On Kit are supplied separately. For Assembly Instructions and Kit Contents Please Read Below. Tools required (not supplied) are a 19mm spanner and a Philips Screwdriver.

1 x Draper 250W (1/3hp) 6 Bench Grinder 230v 3000 rpm. Supplied fitted with a UK 3 Pin Electrical Plug. International buyers need to fit their own plug / adapter which is suitable for use in their own country.

Comes fitted with 1 x 150mm Fine Grinding Wheel 1 x 150mm Medium Grinding Wheel Please Note - the Motor will Run Hot. The run time is around 20-25 minutes on, allow to cool, then continue.

Do Not Push Hard against the polishing wheels. This will strain the motor. Using Light Pressure with the correct polishing procedures and this will get satisfactory result. When polishing using the spindle adapters attached to the bench grinder, suitable safety glasses, gloves and dust mask (not supplied) must be worn.

Scratch Removal / Scratched Items - If there are scratches in the item being polished a series of wet and dry abrasive paper / discs etc. May have to be used first to remove the scratches prior to the polishing phases. DO NOT use abrasives on Chrome or Nickel plated items as this may permanently damage their surfaces. Use abrasives on gold with care as gold is very soft.

Assembly - The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached to the bench grinder by the following method. Once the bench grinder side guards and the grinding wheels have been removed (please note that the left hand grinder shaft has a left hand threaded nut), the mop spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit.

Please remove the grub screws in the adapters first and then fit the adapters as far as they will go onto the shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten them using your allen key (not supplied) Polishing Add-On Kit Contents Some further product technical. Information on the below items can be seen in the additional listing images.

2 x Bench Grinder Spindle Adapters (1 x left and 1 x right - short length) These are used to attach polishing mops to the bench grinder shafts. 1 x 6" x 1/2" Swansdown / Canton Metal Polishing Wheel. Very soft cotton polishing wheels for final buffing 1 x 6" x 1/2" White Stitch Metal Polishing Wheel. These are versatile cutting metal polishing mops for general polishing.

White stitch metal polishing mops can be used for first stage polishing with Brown metal polishing compound 1 x Flexible Drive Shaft. Can only be be used on the right hand side of the bench grinder. The adapter slides over the bench grinder shafts as the spindle adapters do. The flexible drive shaft then attaches to the end of the adapter.

Polishing Compound Bars Weight Approx. 85mm x 20mm x 27mm. See additional image 1 x Pink Bar - For polishing chrome and nickel plated items 1 x Rouge Bar - For polishing gold and silver 1 x Brown Bar - 1st stage polishing. Polishing Rotary Bits An assortment of cotton, felt, wool, rubber and nylon polishing / cleaning bits (as shown in the main image) for use with the flexible drive shaft.

1 x Cloth (colour may vary) 1 x Instructions. Northern Ireland, Channel Islands, Isle of Man.

And certain Scotland Post Codes (including some Aberdeenshire Post Codes) as can be seen listed below. The Free Post and Packaging to the above areas does not apply to this listing as the carriers charge a premium to deliver to those areas. Northern Ireland - Isle Of Man - Isle Of Wight - Channel Islands - And the following Scotland Post Codes AB31 to AB38 AB40 to AB56 HS IV1 to IV28 IV30 to IV32 IV36 to IV40 IV41 to IV49 IV51, IV55 & IV56 IV52 to IV54 IV63 KA27 and KA28 KW1 to KW14 KW17 to KW17 PA20 PA41 to PA49 PA21 to PA38 PA60 to PA78 PH4 to PH41 PH41 to PH42 PH49 to PH50 ZE. Please make sure there is somebody available to receive and sign for the consignment. The carrier will only attempt to deliver twice and if there is nobody there on both occasions the receiver will then have to collect from their local depot within 5 days. The item "250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive" is in sale since Wednesday, December 30, 2020. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Buffers & Polishers".

The seller is "polishingsupplies" and is located in Hook. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Russian federation, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam.

  • Power Source: Corded Electric
  • Type: Polisher
  • Disc Diameter: 6 inch
  • MPN: BGJ#250-6-flexi
  • Voltage 230 Volts: Not suitable for 110V Countries eg North America
  • Assembly: Polishing kit is separate.

    Needs to be assembled

  • Electric Plug: Supplied with 3 pin UK Plug
  • Scratched Surfaces: See below
  • Free UK Shipping Restrictions: Please see Item Description Below
  • Power: 250W
  • Brand: Draper
  • Manufacturer Warranty: Please read below
  • Bench grinder polisher: Bench Mounted
  • Run Time: 20 Mins - see below
  • Supplied As: 1 x Bench Grinder + 1 x Add-On Polishing Kit
  • Voltage: 230 V


250W 6 Bench Grinder + Jewellery Gold Silver Polishing Buffing Kit + Flexidrive